1 phase input / 3 phases output power 3KW-20KW
1 phase to 3 phases converters are widely used for vessels,motors,factories, railway,wind power system,power plants,ect.
Application
Suitable for areas without electricity,motors,ship,solar energy,wind energy system,all kinds of household appliances, electric tools,ect
Introduction
1 phase to 3 phases converter is a kind of equipment(3KW-500KW) which converts input single phase(220VAC) to output three phases(380VAC) for all kinds of appliances and tools.
Features
●Adopted the fifth generation IPM power module from Japanese mitsubishi
●With pure sine wave output
●Excellent transient response
●Small waveform distortion
●High conversion efficiency and stable output voltage
●With isolation transformer,strong load performance and long server life
●High reliability,high stability,high antivibration effect,no pollution
●LCD displays machine running status of output voltge,overvoltage,undervoltage,overload,overheating,ect
●Intelligent fan control system for cooling
●Low no-load loss
Specification
| Model | GPF-3KW | GPF-6KW | GPF-10KW | GPF-15KW | GPF-20KW |
| Rated capacity(KW) | 3KW | 6KW | 10KW | 15KW | 20KW |
| Input voltage | 220VAC, single phase | ||||
| Input current | 13.6A | 27A | 45.5A | 68A | 91A |
| Input frequency | 50/60Hz | ||||
| Output | |||||
| Voltage | 380VAC,three phases+4 wires | ||||
| Current | 7.9A | 15.8A | 26.3A | 40A | 52.6A |
| Wave form | Pure sine wave | ||||
| Power factor | 0.95 | ||||
| Efficiency | 50Hz±0.05Hz | ||||
| Overload ability | 150% for 10 seconds | ||||
| Efficiency | >92% | ||||
| CF | 3:1 | ||||
| Display | LCD | ||||
| Insulation strength | 2500VAC for 1 minute | ||||
| Temperature | -15~+55℃ | ||||
| Humidity | 0~90% no condense | ||||
| Protection | overvoltage,overcurrent,overload,overheat,shortcircuit,undervoltage | ||||
| Cooling | forced fan | ||||
| Noise | <40db | ||||
| IP class | IP21 | ||||
| Alititude | <3000M | ||||
| Size(HxWxD) | 530x455x750 | ||||
| Weight(kgs) | 69 | 85 | 115 | 200 | 242 |
